All this heat is stored in a thermoacumulator with a new conception, where even the smallest details have been improved. Thus it is possible to reduce the waste area and to prevent that the cold water, that enters, mixes in the deposit of the hot water that leaves. It's isolation made in injected polyurethane with up to 8 cm of thickness in the hotter water zone, reduces to minimum levels the losses of the system during the night. The reliability is possible due to the lack of pumps, distinguishing thermostats, expansion vases, air purgers or termovalvs, therefore the system needs only sun to function, while it's closed primary circuit hinders the calcareous rock formation.

The long life steel AISI 314 and the inox steel AISI 316 in the interior of the termoacumulador with outer cover, such as the panels, hinders the aging and at the same time protects the sistem in zones of atmospheric salinity.

The economy is the consequence of its raised income, the reduction of the electric heat resistence of for only 1500 W did that in all the year, rarely needs to be on, and exactly when this happens it only raises the temperature of the water with no use of extreme amounts, unlike the traditional sistems

Caracteristics:

Termoacumulator: 300 liters.

Captation area: 4 m2

Electric resistance with regulable thermostat: 1500 W

Warranty: 10 years